This file is for mills using the Machine Master control and MasterCam version 8. The ZIP file contains MCMSTRV8.PST, MCMSTRV8.TXT and MP.DLL ver 8.21. If you rename the file to M8MASTER.EXE it will be a self extracting ZIP file. Unzip these files into a new folder, then copy the MCMSTRV8 files to the MasterCam Post directory. If you already have MP ver 8.21 use it.

This file is for mills using the Machine Master control and MasterCam version 7. Unzip it to your Mill7\PST directory.

This file is for mills using the Machine Master control and MasterCam version 6. Unzip it to your Mill6\PST directory.

This file is for mills using the Machine Master control and BobCAD 18 & 19.
UnZip and save it to your "Bobcad\NC config" directory.
In Versions 18 and 19, in the NC editor under the "File" menu click "Setup".
Change the ".TAP" to ".AGC" and your G code files will be saved as ".AGC" files.
You can also add beginning and ending code here instead of using the Macro
button in the NC editor.

This file is for mills using the Machine Master control and BobCAD 15, 16 & 17.
UnZip and save it to your "Bobcad\Config" directory.

This file is for mills using the Machine Master control and BobCAD 14.1.
UnZip and save it to your "BOBCAD\CAMCFG" directory.

This is for mills using the Machine Master control and 300 series mill boards
Copy this file to your computer and UnZip it to a 3 1/2" Floppy. You can rename the file to cncdist3.exe in a new folder and it becomes a self extracting file. Copy all of the files except cncdist3.exe to the floppy.

This is for mills using the Machine Master control and 400 series mill boards
Copy this file to your computer and UnZip it to a 3 1/2" Floppy. You can rename the file to cncdist4.exe in a new folder and it becomes a self extracting file. Copy all of the files except cncdist4.exe to the floppy.

This is for mills using the Machine Master control and 500 series and above mill boards
Copy this file to your computer and UnZip it to a 3 1/2" Floppy. You can rename the file to cncdist5.exe in a new folder and it becomes a self extracting file. Copy all of the files except cncdist5.exe to the floppy.